- Home
-
Acrylic
-
Acrylic Up Cut Tools
- AC Tools | 3mm shank | Crown Norge
- AC Tools | 4mm shank | Crown Norge
- AC Tools | 6mm shank | Crown Norge
- AC Tools | 8mm & 10mm shank | Crown Norge
- ACB Tools | Balanced Tools | Crown Norge
- AC2 Tools | Improved GEN 2 |Crown Norge
- REG_111 | Single Spiral Flute Tools | Regal Blade
- REG_121 | Twin Spiral Flute Tools Standard | Regal Blade
- REG_122 | Twin Spiral Flute Tools Long | Regal Blade
- REG_123 | Twin Spiral Flute Tools Extra Long | Regal Blade
- REG_6.35 | Twin Spiral Flute Tool | Regal Blade
- Acrylic Down Cut Tools
- Acrylic Compression Cut Tools
-
Acrylic Up Cut Tools
-
Multi-Purpose
- V Grooving
-
Other Tools
-
Underlay Collets & Oil
- Regal Info
MPC-18 | D 3mm /L 6mm /S 6mm
£35.30
CROWN NORGE DLC Coated Carbide Tool. (DLC) coatings are ultra-hard, extremely smooth, highly lubricious coatings. DLC is the best coating for dry cutting Aluminum or ACM.
| Code | Cut Diameter (D) | Cut Length (L) | Shank (S) | Total Length (T) |
| MPC-18 | 3.0mm | 6.0mm | 6.0mm | 50mm |
Crown Norge Part No. S1-3,0/6-6-50 MP-DLC
CROWN NORGE DLC Coated Carbide Tool. (DLC) coatings are ultra-hard, extremely smooth, highly lubricious coatings. DLC is the best coating for dry cutting Aluminum or ACM.
| Code | Cut Diameter (D) | Cut Length (L) | Shank (S) | Total Length (T) |
| MPC-18 | 3.0mm | 6.0mm | 6.0mm | 50mm |